Project Report on Design of Flexible Pavement & its Quality
Here is another Project Report on Design of Flexible Pavement & its Quality control & management lets go and read about its journals.
Pavement Design
Pavement is the durable surface material laid down on an area intended to sustain vehicular or foot traffic, such as a road or walkway.
In the past cobblestones and granite, sets were extensively used, but these surfaces have mostly been replaced by asphalt or concrete
There are two types of pavements:
- Flexible pavement
- Rigid pavement
Functions of Pavement Components:
- Soil Subgrade
- Sub-base and Base Course
- Wearing Course
Contents of Project Report
- Design Standards
- Design Speed
- Basic Principles of Geometric Design
- Cross Sectional Elements
- Superelevation
- Gradients
- Access design speed
- Design of Pavements
- Soil and Material Properties
- Traffic Surveys
- Design Traffic
- Vehicle Damage Factor
- Subgrade Strength
- Design Composition
- AASHTO
- Design Composition
- Adopted Pavement Design
- Design of Service Roads
- Grain Size Analysis (GSA)
- Free Swell Index (FSI)
- Field Density Test by Sand Replacement Method
- Modified Proctor Compaction Test
- Bitumen Extraction Test
- California Bearing Ratio Test (CBR Test)
- Embankment construction
- Subgrade Construction
- Wet Mix Macadam Construction
- Application of Prime Coat
- Plant and Machinery
- Quality Management
- Quality Policy
- Quality System and Quality Strategy
Leave a comment