Share
Get Access to:
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
To lay drip irrigation, you will need to take the following steps:
1. Measure and plan the layout of the irrigation system to ensure it covers the area you wish to irrigate thoroughly.
2. Install the main line of the irrigation system, which is typically a larger diameter tube that runs the length of the area you wish to irrigate.
3. Install the lateral lines of the irrigation system, which are typically smaller diameter tubes that run off the main line and are used to deliver water to specific areas.
4. Connect the lateral lines and the main line with fittings, such as elbows and tee connectors.
5. Install the tubing, or driplines, which will directly deliver water to the plants or areas you wish to irrigate.
6. Connect the tubing to the lateral lines with tubing connectors.
7. Install any additional components, such as valves, filters, pressure regulators, and backflow preventers, if necessary.
8. Set the water timer for the desired frequency and duration of watering.
9. Test the system to ensure everything is working properly.