Share
Expert Civil Latest Questions
Get Access to:
Get Access to:
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. Locate the existing irrigation controller and disconnect from power. 2. Unscrew the old irrigation controller from its mounting bracket and remove it. 3. Install the new irrigation controller in the same spot, following the directions for that particular model. 4. Mount the new irrigation controlRead more
1. Locate the existing irrigation controller and disconnect from power.
See less2. Unscrew the old irrigation controller from its mounting bracket and remove it.
3. Install the new irrigation controller in the same spot, following the directions for that particular model.
4. Mount the new irrigation controller with the screws you used to remove the old one.
5. Reconnect the wires for the different valves, solenoids, and sensors.
6. Reconfigure the program settings on the new irrigation controller according to your needs.
7. Test the controller with a manual cycle to ensure correct operation.
8. Restore the power to the system, and you’re done!