Share
Expert Civil Latest Questions
Get Access to:
Get Access to:
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. Prepare the surface: Clean the surface that you will be applying the roofing cement to. Remove any dirt, debris, and old caulk from the area. 2. Cut the tip of the tube: Cut the tip of the tube of roofing cement at an angle, about 1/4 of an inch from the end. 3. Apply pressure: Apply even pressurRead more
1. Prepare the surface: Clean the surface that you will be applying the roofing cement to. Remove any dirt, debris, and old caulk from the area.
2. Cut the tip of the tube: Cut the tip of the tube of roofing cement at an angle, about 1/4 of an inch from the end.
3. Apply pressure: Apply even pressure to the tube of roofing cement as you squeeze it in order to ensure an even application.
4. Seal the seams: Start at one end of the seam, and squeeze the tube of roofing cement to fill the gap between the two pieces. Move the tube along the seam while continuing to apply even pressure, ensuring that the seam is completely sealed.
5. Clean up: Use a putty knife or other appropriate tool to remove any excess roofing cement that may have accumulated along the seam. Allow the roofing cement to dry completely before exposing it to any water.
See less