Share
Expert Civil Latest Questions
Get Access to:
Get Access to:
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
The S code for stresssing of a girder is as follows: S1: Calculate the total load on the girder. S2: Select appropriate section of girder. S3: Calculate the moment of inertia and other geometric properties. S4: Calculate critical stresses due to bending, shear and torsion. S5: Check ultimate and serRead more
The S code for stresssing of a girder is as follows:
See lessS1: Calculate the total load on the girder.
S2: Select appropriate section of girder.
S3: Calculate the moment of inertia and other geometric properties.
S4: Calculate critical stresses due to bending, shear and torsion.
S5: Check ultimate and serviceability limit states of design.
S6: Check connections and incorporate allowable stresses due to connections.
S7: Make provision for lateral movement of supports.
S8: Check for stresses due to shrinkage, creep and vibration.
S9: Add corrosion allowance in the design.
S10: Check the adequacy of foundations.