How to put veneer on plywood?
Share
Get Access to:
Get Access to:
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
1. Start by thoroughly cleaning the surface of the plywood with a cloth and neutral detergent. 2. You will need to apply a thin coat of wood glue or contact cement to both the plywood and the veneer. 3. Use a brush or a spatula to spread an even layer on the surfaces. 4. Once the adhesive is dry, plRead more
1. Start by thoroughly cleaning the surface of the plywood with a cloth and neutral detergent.
See less2. You will need to apply a thin coat of wood glue or contact cement to both the plywood and the veneer.
3. Use a brush or a spatula to spread an even layer on the surfaces.
4. Once the adhesive is dry, place the veneer on the plywood and press firmly.
5. Use a rolling pin to create a strong bond between the veneer and the plywood.
6. Secure the edges using clamps.
7. Carefully trim away any excess veneer with a sharp knife or craft blade.
8. Finish by sanding the finished surface to create a smooth finish.